Denon PMA-2500NE - Updating via System u-com

2. Updating via System u-com (U102)
2.1. Items to Be Prepared
(1) Software suite to be written (FLASHSTA.exe, Update le.)
(2) Personal Computer OS is Windows7 (Be installed "
FLASHSTA.EXE
")
(3) RS-232C cable (9P (Male), Straight).
(4) 8U-210100S WRITING KIT (OLD JIG : SPK-581 WRITING KIT) 7P FFC (Straight)
2.2. Connecting the WRITING KIT to This Unit
(1) Check that the power of this unit is off.
(2) Connect the RS-232C cable to the computer and WRITING KIT.
(3) Connect the update terminal of this unit to the WRITING KIT.
RESET
5V
3.3V
LOW
HIGH
CNVSS EPM CE DSPBOOT
① Connect the RS-232C cable.
(Straight cable)
② Align the switch in the direction of the arrow.
④ Power ON of the this unit.
Press "RESET" button.
↑Top side is contacts of
flexible card cable.
Using the 7P FFC(Straight).
●is 1PIN side.
→This side is contacts of
flexible card cable.
●is 1PIN side.
Computer
③
25