Denon PMA-495R - Remote Control Unit Functions; Power and Muting Buttons; Component Selection Buttons; Remote Operation Cautions

13
ENGLISH
• The RC-176 Remote Control Unit can control CD players and cassette decks manufactured by DENON.
• Note that operation may not be possible for some models.
• Buttons are conveniently separated into groups, each group controlling one specific component. The groups are AMP, FUNCTION, CD, DECK
and TUNER etc..
CAUTION:
• If the power is turned off with the Remote Control Unit, the set is switched to the power stand-by state. If you are absent for a long
period of time, unplug the power cord.
• Only the MUTE/STANDBY LED !1 lights when in the power stand-by mode.
• You may experience erratic operation of the Remote Control Unit if it is operated in fluorescent light and direct sunlight, in particular if this
light strikes the Remote Control Sensor on the Amplifier. However, this is not a malfunction, and if this should happen, simply protect the
sensor against such light.
For details on operating other components, refer to the operating instructions for the CD player and/or cassette deck.
Remote Control Unit RC-176 supplied with the PMA-495R
q
button
• When the main unit’s POWER switch is set to the
ON/STANDBY position ( ¢ ), press this to turn the PMA-
495R’s power on and off.
• When the power is turned off from the remote control
unit, the main unit’s MUTE/STANDBY LED remains lit,
but the input LED turns off, indicating that the PMA-495R
is in the standby mode.
• When the main unit’s POWER switch is set to the OFF
position ( £ ) after turning the power off from the
remote control unit and then set back to the
ON/STANDBY position ( ¢ ), the PMA-495R is set to the
operating mode.
POWER
w
MUTING button
Pressing this switch will activate the muting condition and
no signals will be output to the speakers.
Other buttons
Other buttons are exclusively for the PMA-495R, and
function in the same way as the corresponding buttons on
the set.
This button will not function if there is a power
failure, if the power cord is not plugged in, or when
using an audio timer.
PLAY 1 PLAY button
0 PLAY (REV) PLAY (REV) button
2 STOP STOP button
6 REW REWIND button
FF 7 FF button
1 PLAY
PLAY button
2 STOP STOP button
8
Reverse Track
Search button
9
Forward Track
Search button
RANDOM
Refer to the
operating
instructions of your
DENON CD player
REPEAT
DISC SKIP
3 PAUSE PAUSE button
4 REC
3 PAUSE
A/B
Refer to the operating
instructions of your
DENON tape deck.
A/B DECK
SELECT button
Press this button to move up or down among the preset
station numbers.
•
ª
CD
DECK
TUNER
PRESET buttons
q w