DISASSEMBLY
• Remove each part in the order of the arrows below.
• Reassemble removed parts in the reverse order.
• Read "Precautions During Work" before reassembling removed parts.
• If wire bundles are removed or moved during adjustment or part replacement, reshape the wires after completing the
work. Failure to shape the wires correctly may cause problems such as noise.
FRONT ASSY
See "
DISASSEMBLY
2. FRONT ASSY
and "
EXPLODED VIEW
"
FRONT PCB
(Ref. No. of EXPLODED VIEW : P1)
HP PCB
(Ref. No. of EXPLODED VIEW : P3)
SIDE COVER ASSY
See "
DISASSEMBLY
４
. SIDE COVER
and "
EXPLODED VIEW
"
(Ref. No. of EXPLODED VIEW : 16, 36)
TOP COVER
See
"DISASSEMBLY
1. MAIN ASSY
and
"EXPLODED VIEW"
(Ref. No. of EXPLODED VIEW : 11)
MAIN ASSY
See "
DISASSEMBLY
1. MAINT ASSY
and "
EXPLODED VIEW
"
MAIN PCB
(Ref. No. of EXPLODED VIEW : P8)
GUIDE F PCB
(Ref. No. of EXPLODED VIEW : P2)
AMP PCB
(Ref. No. of EXPLODED VIEW : P7)
SMPS PCB
(Ref. No. of EXPLODED VIEW : P6)
BOTTOM COVER ASSY
See "
DISASSEMBLY
５
. BOTTOM COVER
and "
EXPLODED VIEW
"
(Ref. No. of EXPLODED VIEW : 26)
NFC PCB
See "
DISASSEMBLY
3. NFC PCB
and "
EXPLODED VIEW
"
NFC PCB
(Ref. No. of EXPLODED VIEW : P5)
12
To Next Page
Loading...
