JIG FOR SERVICING
The following jigs (extension cable kit) are used when repairing the PCBs.
Order the jigs from your dealer if necessary.
CAUTION : Incorrect connections may cause malfunction.
Connection of Jig for PCB
Items to Be Prepared
8U-110084S : EXTENSION UNIT KIT : 1 Set
Insulation sheet (Not supplied) : 1 sheet
Ground lead (Not supplied) : 1 pc
Procedures
Connect the extension cable to the MAIN PCB and AMP PCB.
Rear side
Front side
Insulation sheet
CP501
AMP PCB
CP301
Ground Lead
Ext. Cable
MAIN PCB
24
To Next Page
Loading...
