Denon PMA-710AE - Troubleshooting Guide; Power On Issues; No Sound Output (Both Channels); Protection Mode Issues


Getting Started Operation Troubleshooting
ENGLISH
Specications
w qw q
(R) (L)
w qw q
(R) (L)
Speakers A
Connecting Players
"6%*0065
3
-
"6%*0
"6%*0065
3
-
"6%*0
"6%*0065
3
-
"6%*0
*/
3
-
"6%*0
(/%
"6%*0
065
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
• Only Turntables tted with a MM (Moving Magnet) cartridge can be used with this unit. If you have
an MC (Moving Coil) cartridge you will need to use a commercially available head amplier or step-up
transformer.
• If humming or other noise is generated when the ground wire is connected, disconnect it.
CD player
Tuner
DVD player
Turntable
(MM cartridge)
Speakers B
Speaker Connections
Connections
w q
w q
HIGH
LOW
w q
w q
HIGH
LOW
Bi-wiring Connection
• When bi-wiring with bi-wireable speakers connect the mid and high range terminals to SYSTEM (A)When bi-wiring with bi-wireable speakers connect the mid and high range terminals to SYSTEM (A)
(or SYSTEM (B)), the low range terminals to SYSTEM (B) (or SYSTEM (A)). This enables playback with
minimized interference between high-range speaker unit and low-range speaker unit.
• Set both theSet both the SPEAKER A/B switches to “hON”.
Speaker (L) Speaker (R)
Power Amplier /
Subwoofer