Denon PMA-710AE - Block and Level Diagram


Connections Operation Troubleshooting
ENGLISH
Specications
Remote Control Unit
• The included remote control unit can be used to
operate DENON CD players and tuners.
• When using it, also refer to the operating
instructions of the other devices.
• Some products may not be operable.
CD player block
OPEN/CLOSE
DISK SKIP
0 ~ 9, +10
PROGRAM/
DIRECT
RANDOM
1/ 3
REPEAT
8
2
9
DISC/USB
FOLDER MODE
REMOTE/
BROWSE
ENTER
FOLDER +/–
uio p
Press this button to open and close
the disc tray.
This button selects the disc, when
using a DENON multi-disc CD
player.
Number buttons
Press this button to switch between
PROGRAM and DIRECT play.
Random playback
Play / Pause
Repeat playback
Reverse-skip
Stop
Forward-skip
Press this button to select “DISC” or
“USB”.
Press this button to select “Folder
Mode” or “Disc Mode”.
Press this button to select the
display mode.
Enter button
Press this button to select the le to
be played.
Cursor buttons
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
TUNER block
TUNER PRESET d, f
These switch the preset channel.
POWER button
This operates the main unit’s power.
Input source selector buttons
These switch the input source.
MUTING button
Press this to mute the sound.
The power indicator on the main unit
blinks red.
Press again to produce sound.
Volume adjust buttons
These adjust the volume.
Amplier operating buttons DENON product operating buttons
Getting Started