Denon PMA-925R - Page 9

e Inner Panel
1)
2)
Remove 5 Knobs and 4 nuts.
Remove 2 screws (H) and detach Inner Panel
in arrow direction.
e Each Unit of Inner Panel
1
~~
2)
3)
Remove 3 screws oO , and detach LED and
Switch Unit.
Remove 2 screws G@) , and detach u-Com Unit.
Remove 2 screws (kK) securing Headphone, SP
Switch Unit with Inner Panel.
Remove 1 screw () and 1 washer, and detach
Headphone, SP. switch Unit.
Remove 2 screws (M) and a Knob, then detach
Power Switch Unit.
Inner Panel
LED and Switch Unit
” u-Com Unit
PMA-925R/725R
Headphone. Speer
and Switch Unit