EN
FR
ES
8
Install the Windows driver software
Windows OS
System requirements：Windows 8.1 or Windows 10
Download the dedicated driver from the “Download” section of the
PMA-A110 page of the Denon website (https://www.denon.com/)
onto your PC.
Install the driver.
q Select the language to use for the installation.
w Click “OK”.
e The wizard menu is displayed. Follow the instructions
on the screen.
r When the wizard is completed, click “Yes”.
Unzip the downloaded fi le, and double-click the exe fi le.
q
w
Please see the FAQ at www.denon.com if you experience any
issues getting audio to play from your computer through the
PMA-A110. You may also want to check the support pages for
audio player application.
r
The installation of the driver software is not necessary in the following cases.
• When you do not play back the music from a PC using USB-DAC of this unit.
• When using a macOS.
The driver software cannot be installed correctly if your PC is connected to the
unit by a USB cable. If the unit and your computer are connected by a USB
cable and the computer is switched on before installation, disconnect the USB
and restart the computer.
NOTE
NOTE
1
6
Listen to computer audio via USB-DAC
1
2
3
1.PMA-A110E3_QSG_ENG_00A_200623.indd 81.PMA-A110E3_QSG_ENG_00A_200623.indd 8 2020/06/29 19:37:282020/06/29 19:37:28
To Next Page
Loading...
