Denon POA-A1HDCI - Preparations; Select the input source; Control link connection; Set operation mode and input mode, then connect the speakers

- 5 -
※ PAIN?<CR> ：RESPONSE becomes the following order.
State of input channel L1 –＞State of L2 -> State of L3 -> State of L4 -> State of L5 ->
State of R5 -> State of R4 -> State of R3 -> State of R2 -> State of R1
PAINL1xxx<CR> PAINL2xxx<CR>PAINL3xxx<CR>PAINL4xxx<CR>PAINL5xxx<CR>
PAINR5xxx<CR>PAINR4xxx<CR>PAINR3xxx<CR>PAINR2xxx<CR>PAINR1xxx<CR>
(xxx ; "OFF" or "RCA" or "XLR")
※ PAAMP?<CR> ：RESPONSE becomes the following order.
State of Power AMP channel L1/L2 -> State of L3/L4 -> State of L5/R5 ->
State of R4/R3 -> State of R2/R1
PAAMPL12xxx<CR> PAAMPL34xxx<CR>PAAMPLR5xxx<CR>PAAMPR34xxx<CR>PAAMPR12xxx<CR>
(xxx ; "NRM" or "BAP" or "BTL")