Connecting
the
Power Cord
11
II
AM
ANTENNA
mIT
~lOOPANT.
XM
ElMI
-:
8 r
o
COAX."
;:.Q=-----.A.-f--
ACIN
DTUANTENNA
HDRadic
To
household power outlet
(AC
120
V.
60
Hz)
....
-----.lpM~~m~~
I
C~
Power cord (Supplied)
&la
• Only
use
the supplied power cord.
•
Be
sure the power cord
is
unplugged from the power outlet before
connecting or disconnecting it to the
AC
inlet.
10
Protector circuit
The protection circuit will
be
activated
in
the following cases:
• When the temperature around the set
is
extremely high
• When the set
is
used for long periods
of
time with a high output
and
the internal temperature rises
Speaker output
is
suspended when the protector circuit operates.
In
this
case,
remove the power cord, make sure there
is
adequate
ventilation
and
wait for the main unit to cool down. Afterwards,
re-
insert the power cord.
If the protection circuit
is
activated again even though there
are
no
problems with the wiring or the ventilation around the unit, switch off
the power and contact a
DEN
ON
service center.
To Next Page
Loading...
