Denon UCD-250 - RECORDING CASSETTE TAPES; Music Search and Display

=
©
“188 8B. BG, ei Ma
veee eee
Set the CO in the disc tray.
Refer to Page 16.
The display appears several seconds
after the disc tray closes.
ro ben Oa
429696760 90 11 02 12 1095
Press the OPEN/CLOSE button.
The disc tray closes.
|e 18
ci
D play starts. 1294667000011 12 19 96 08
Press the play button,
To stop play temporarily:
“PD PLAY” goes off and “ft PAUSE” appears.
CO play is paused at the point
the button is pressed.
Press the pause button.
To resume CD play:
it PAUSE” goes off and “> PLAY” appears.
CD play resumes from the point
the pause button was pressed.
Press the play button.
To stop CD play:
iS 62. 83, ™"
023680700 00 01 9919 0855
Press the stop button.
NOTE:
e OU is displayed on the track number section of the display for several seconds after the disc
(insert the disc before performing the following operations.)
|
@
Playing
Certain
Tracks
DIRECT
SELECTION
€xampile:
Playing
the
&th
track
Perform
this
operation
from
the
remote
control
unit.
@ Press the DIRECT button.
@ Press track button “8". “TRACK 8” appears on the
display, and the 8th track begins playing.
@ When the end of the track is reached, play
continues on to the next track.
© For track numbers of 11 and higher,
for example 15, press and (5).
For track numbers of 20 and higher,
for example 23, press (230). (£70).
and GJ.
For track number 20, press and
gaystedtns sessssnerseseaerecsstesnseed t TRACK REPEAT
@ When the specified track finishes playing, the pickup returns to
the beginning of that track and play is repeated.
@ Ifthe REPEAT button is pressed once during play, the track will
be played repeatedly.
¢ If the REPEAT button is pressed once during programmed
play, the track will be played repeatedly.
* {ifthe REPEAT button is pressed once while the disc is stopped,
the TRACK numbers indicator flashes and the 1 track repeat
play mode is set.
sesscsrsmnersnnseoseeeeneee] ALL TRACKS REPEAT
@ When the last track finishes playing, the pickup returns to the
first track of the disc and play is repeated.
© Ifthe REPEAT button is pressed twice during play, the disc will
be played repeatedly.
@ If the REPEAT button is pressed twice during programmed
play, the program will be pisyed repeatedly.
* If the REPEAT button is pressed twice while the disc is
stopped, the TRACK numbers indicator lights and the all tracks
repeat play mode is set.
@ Press the REPEAT button once.
@ Press the 144.44 or DP DDI button, and select the desired
track.
@ Press the play button (>) to start play.
@ Press the REPEAT button twice.
@ Press the play button (P) to start play.
@
Playing
a
Specific
Section
Repeatedly
..........-rrccevesere
sci
csbayutate
tuiesubsiwavenctsbdicdbebbvasasniaie
ssbauibadacerninreiiisidsrerbnincesiess|
BECTON
REPEAT
Example: The CD has a totel of 15 tracks
Only that track is played repeatediy, and that track number lights
on the music calendar.
* With a 1-track repeat of track 21 or higher, “TRACK No.” flashes.
The total number of tracks flashes, and then ( the first
track is repeated by pressing the play button @ when play
is started by direct selection from the ramote contro! or with
the DPI or K4@ button, only those selected tracks
are played repeatedly.
{2) Press the REPEAT button before CD play.
ss due
sce yyles
tpseseresmunaun
Press the REPEAT button before CD play or during CD play.
Cot wns
Press the REPEAT button during CO play.
wet
C&a
Press the REPEAT button during CD play.
rut
Cau
Pressing the REPEAT button once
The track numbers contained on the disc light up on the
music calendar, and all tracks are played repeatedly.
Dessresmonnud
“REPEAT A-” lights up.
if nothing else is done, ail tracks are played repeatedly.
“REPEAT A-B* lights up.
ony The A:B section is played repeatedly.
returns the player to regulsr CD play.
17
G)
m
z
m
a)
>
-
”
m
i?)
a
12)
Zz