Denon UDR-F10 User Manual

Various Timer Operations
Pre-main
amplifier
(UPA-F10)
Pre-main
amplifier
(UPA-F10}
OL
CD player (UCD-F10)
Cassette deck (UDR-F10)}
G)
m
2
m
a
>
-
”
m
i?)
=
io)
a
=v. C18B=88.88. os
=888866:6 8-580.
Exampie 2: Playing a cassette tape with the timer
SYSTEM POWER
Press the SYSTEM POWER switch on
the pre-main amplifier to turn on the
system's power.
Press the cassette deck’s OPEN/ Srencaoet
CLOSE button to open the
cassette tray.
Load the cassette tape in the
cassette tray.
Refer to Page 16.
Press the SYSTEM POWER switch
on the pre-main amplifier to turn
on the system’s power.
Press the CD player's OPEN/CLOSE
button to open the disc tray.
Load the disc in the disc tray.
Refer to Page 20.
Press the CD player's OPEN/CLOSE
button again to close the disc tray.
OPEwCLOsE
Press the cassette deck’s OPEN/
CLOSE button again to close the
cassette tray.
TIMERTHMER STANDBY
CY
Press the tuner’s TIMER/TIMER
5 | STANDBY button for at least
3 seconds.
Press the tuner’s TIMER/TIMER Oe pee ee
STANDBY button for at least
3 seconds.
Use the tuner’s UP and DOWN
buttons
to
set
the
“CD”
mode.
Use
the
tuner’s
UP
and
DOWN
buttons to set the “TAPE” mode.
Now follow steps 6 to 16 under “Setting the Timer” on Page 13.
® Check that the cassette deck is set to the desired Dolby NR mode.
14

Denon UDR-F10 Specifications

General

Brand	Denon
Model	UDR-F10
Category	Stereo System
Language	English