To Next PageTo Next Page
Need help?Do you have a question about the Denver CCG-4010 and is the answer not in the manual?
General| Product color | Black |
|---|---|
| GPS (satellite) | Yes |
| Number of cameras | 1 |
| Maximum frame rate | 30 fps |
| Main camera viewing angle | 140 ° |
| Display diagonal | 3 \ |
| Built-in storage media | - |
| Compatible memory cards | MicroSD (TransFlash) |
| Bluetooth | No |
| USB version | 2.0 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Quantity per intermodal container (20ft) | 9200 pc(s) |
| Quantity per intermodal container (40ft) | 22960 pc(s) |
| Package depth | 70 mm |
| Package width | 150 mm |
| Package height | 110 mm |
| Battery capacity | 250 mAh |
| Operating voltage | 12 V |
| Power source type | Battery |
| Cables included | USB |
Weight and Dimensions| Depth | 38 mm |
|---|---|
| Width | 90 mm |
| Height | 50 mm |
Connect camera to car charger via USB port for power.
Instructions for powering the device on and off.
Format SD card and start/stop video recording process.
Switch to photo mode and capture images using buttons.
Review recorded videos and photos by switching to playback mode.
Navigate menu pages to configure device settings.
Connect to smartphone/tablet for wireless camera control.
Lock current video to prevent deletion during recording.
Configure automatic camera shutdown after car is turned off.
Enable motion detection recording for parked vehicle security.
Set car license plate number for display in recorded videos.
Record travel data like distance, route, and speed with GPS antenna.
