Need help?Do you have a question about the Denver SHV-120 and is the answer not in the manual?
General| Best uses | Home |
|---|---|
| Product color | Black, Grey |
| International Protection (IP) code | IP53 |
| Sensor type | CMOS |
| Field of view | 130 ° |
| Maximum frame rate | 30 fps |
| Supported video modes | 720p |
| Connectivity technology | Wireless |
| Mobile operating systems supported | Android, iOS |
| Compatible memory cards | MicroSD (TransFlash) |
| USB port type | Micro-USB |
| Power source type | Battery |
| Number of batteries supported | 2 |
| Sustainability certificates | CE |
| Number of batteries included | 2 pc(s) |
Weight and Dimensions| Bell depth | 36 mm |
|---|---|
| Bell width | 65 mm |
| Bell height | 158 mm |
| Package depth | 84 mm |
| Package width | 100 mm |
| Package height | 234 mm |
| Package weight | 460 g |
Identifies and describes the main components of the video doorbell.
Explains the meaning of different indicator light colors and patterns for device status.
Guide to downloading the Denver Smart Home app and initiating device pairing.
Instructions for registering an account or logging in to the Denver Smart Home app.
Steps to add the smart camera/doorbell within the Denver Smart Home app interface.
Instructions for opening the battery cover and removing insulation tabs for pairing.
Guide to selecting the Wi-Fi network and entering the password for connection.
Using the doorbell camera to scan a QR code displayed on the mobile phone for pairing.
Finalizing the setup process and accessing the live preview of the doorbell.
Confirmation screen indicating the successful addition of the doorbell device.
Instructions to enable push notifications on your phone for app alerts.
Description and identification of the wireless chime's components like Tune and Volume buttons.
Ensures the doorbell is connected to the phone and the chime is plugged in before setup.
The initial step before proceeding with the wireless chime setup process.
How to cycle through 52 available tunes using the Tune Button to select a desired sound.
Instructions to press and hold the Volume Button to activate the chime's pairing mode.
Pressing the Call Button on the doorbell to initiate the pairing process with the chime.
Pressing the Call Button again to confirm the selected tune and complete pairing.
First step for installation: removing the back mounting bracket from the doorbell.
Securing the back bracket to the door or wall using screws or double-sided tape.
Fitting the doorbell into the mounted bracket and securing it with a screw.
Tip to use live preview for optimal installation height, not below shoulder level.
Instructions on how to perform a factory reset by holding the RESET button.
Steps to share access to the video doorbell with other family members via the app.
Guide on adjusting the motion detection sensitivity levels (High, Medium, Low) in the app.
Information on the maximum number of users who can view the video feed simultaneously.
Clarifies that only 2.4GHz Wi-Fi networks are supported, not 5GHz.
Advice on improving doorbell signal strength by repositioning the router or using extenders.
Confirms that the device is solely battery-powered and does not require wired connections.
States that the doorbell can be used with both Tuya Smart Life and Denver Smart Home apps.
To Next Page