Need help?Do you have a question about the DePuy Mitek vapr vue and is the answer not in the manual?
General| Category | Medical Equipment |
|---|---|
| Type | Electrosurgical System |
| Manufacturer | DePuy Mitek |
| Model | VAPR VUE |
| Application | Arthroscopic Surgery |
| Technology | Radiofrequency Ablation |
| Portability | Stationary |
| Intended Use | Soft Tissue Ablation and Hemostasis |
| Control Type | Foot Pedal and Hand Control |
| Operating Modes | Coagulation |
| Electrode Type | Disposable |
| Power Source | AC Power |
The VAPR VUE Wireless Footswitch is paired with the VAPR VUE Generator to activate the electrosurgical system.
Do not use in flammable anesthetics; potential spark generation from battery operation.
Annual verification, daily inspection, and O-ring seal replacement are recommended for safety and performance.
Operates on 2.405-2.480 GHz; use specified batteries and remove for long-term storage.
Details on RF activation, transmission direction, and pairing with generators.
Advice on multiple units, tipping, backup activation, and proper storage for battery life.
IP68 rated, can be immersed. Use approved cleaners; do not autoclave or use ethylene oxide.
Allow device to reach room temperature before use if it is cold.
Unscrew, remove cover, replace batteries observing polarity, and reassemble securely.
Check and replace the O-ring seal if damaged; ensure the battery cover is flush.
Specifies transport, storage, and operating ambient temperature, humidity, and atmospheric pressure.
To Next Page
