14 15
5 - INSTRUCTIONS FOR USE
5.2 - Adjusting Needle Speed
• Use the Speed +/- buttons to increase or decrease the needle speed (respectively). A
single tone will be emitted for each valid button press.
• The
Dermapen 4™
will emit a double tone to indicate the new speed value has been
accepted, and the selected speed will be displayed on the Speed Indication Arc.
• The speed can be adjusted without a Cartridge connected to the
Dermapen 4™
.
*ST Setting
(Scar Setting-Speed 5) is automatically adjusted to a Speed of – 60htz –
60 revolutions per/second at a depth 3.0mm.
5.3 - Approved Depth Ranges & Depth Under Speed Guide
• Medical Professional (Model Dermapen 4™ 4MD): 0.2 mm – 3 mm
• Professional Aesthetical (Model Dermapen 4™ 4PRO): 0.2 mm – 1.0 mm
The Dermapen 4™ is capable of operating at di erent speed levels according to patient
comfort and practitioner preference. Most treatments are performed at Speeds’ 3 or 4.
Dermapen 4’s ST (Scar Treatment) is automatically calibrated at a speed of 60 Htz/sec.
For sensitive skin such as Rosacea; test at Speed 2 or 3 before proceeding to Speed 3 or 4.
Speed 1
80htz – 80 revolutions per/sec
Speed 3
105htz – 105 revolutions per/sec
Speed 2
90htz – 90 revolutions per/sec
Speed 4
120htz – 120 revolutions per/sec
15
English
5 - INSTRUCTIONS FOR USE
5.4 - Adjusting Needle Depth
• Use the Depth +/- buttons to increase or decrease the needle depth (respectively). A
single tone will be emitted for each valid button press.
• The Dermapen 4™ will emit a double tone to indicate the new depth value has been
accepted and the selected depth will be displayed on the Depth Indication Digits.
• The depth can be adjusted without a Cartridge connected to the Dermapen 4™.
5.5
- Proposed Depth Ranges by Skin Region
DermapenWorld
TM
does not endorse the treatment of the sensitive eye area within the orbital
zone. Caution and visual treatment endpoints must govern the treatment.
Region Thin Skin Thick Skin
Forehead 0.3 - 0.5 mm 0.5 mm
Between Eyebrows 0.3 - 0.5 mm 0.5 mm
Nose 0.3 mm 0.5 - 0.8 mm
Cheek Bone 0.5 mm 0.5 - 0.8 mm
Cheek 0.5 - 1.0 mm 0.8 - 2.5 mm
Lip Area 0.3 - 0.5 mm 0.5 - 0.8 mm
ST Setting – SCAR TREATMENT ST (3.0 mm) ST (3.0 mm)
Stretch Mark 1.5 - 2.0 mm 1.5 - 3.0 mm
Scar Mark 1.0 - 1.2 mm 1.2 - 3.0 mm
To Next Page
Loading...