9
- Power supply meets the requirements.
- The socket is for AC use.
- Do not share one socket with other appliances.
- Power supply is AC 220--240V, 50Hz
2. Cooling operation
- Press the “Mode” button till the “Cool” icon appears.
- Press the “▲”or“ ▼”button to select a desired room temperature. (16 ºC -31 ºC )
- Press the “Fan Speed” button to select wind speed.
3. Dehumidifying operation
- Press the “Mode” button till the “Dehumidify Indicator Lamp” blinks
- Set the selected temperature to current room temperature minus 2 ºC . (16 ºC -31 ºC )
- Set the fan motor to LOW wind speed.
4. Heating operation
- Press the “Mode” button till the “Heat” icon appears.
- Press the “▲”or“ ▼” button to select a desired room temperature. (16 ºC -31 ºC )
- Press the “Fan Speed” button to select wind speed.
5. Timer operation
Setting of timer ON function:
- When the air-conditioner OFF, press the “Timer” button and select a desired ON time
through the temperature and time setting buttons.
- “Preset ON Time” display on the operation panel.
- ON time can be regulated at any time in 0-24 hours.
- Press the “Timer” button again to start time counting.
- Press the “Timer” button a third time to cancel the timer.
Timer OFF operation
- When the air-conditioner ON, press “Timer” button and select a desired OFF time
through the temperature and time setting buttons.
- “Preset OFF Time” display on the operation panel.
- OFF time can be regulated at any time in 0-24 hours.
- Press the “Timer” button again to start time counting.
- Press the “Timer” button a third time to cancel the timer.
To Next Page
Loading...
