22
201835
DIRECT-VENT NATURAL GAS HEATER
DYNAVENT
®
ILLUSTRATED
PARTS LIST
CABINET ASSEMBLY
40,000 BTU/HR MODEL
This list contains replaceable parts used in your furnace. When ordering parts, follow the
instructions listed under Replacement Parts on page 19 of this manual.
2
5
6
1
7
4
9
8
10
SOLID STATE IGNITION
50 60 70 80 90
50 60 70 80 90
3
KEY PART
NO. NUMBER DESCRIPTION QTY.
1 280498 Bottom Shield 1
2 121520 Screw, #8 x 3/8" ** 2
3 191241 Front Cover Trim* 1
4 030642 Front Cover Assembly 1
5 100896 Cabinet Assembly 1
6 070511 Cabinet Insulation (right and left sides) 1
7 120158 Screw, #8 x 3/8" ** 2
8 160912 Thermostat (includes 2 screws) 1
9 121224 Screw, #10 x 3/4" ** 4
10 062242 Thermostat Mounting Plate 1
∆ 070541 Cabinet Insulation (back) 1
∆ 070510 Cabinet Insulation (top) 1
∆ 191245 Operating Instructions Decal (English) 1
∆ 191247 Operating Instructions Decal (French) 1
∆ 531010 Warning Decal 1
∆ 191262 Nameplate 1
∆ Parts available, not shown.
* You must order nameplate and operating instructions decal separately.
** Standard hardware, available at local hardware store.
To Next Page