18
5. USAGE
5.1. How To Pair Keypad and Smart Lock
If your smart lock does not receive commands from the keypad,
that shows pairing is not successful.
Please follow the steps to pair the smart lock and keypad;
1- Press and hold the two buttons on the Utopic-R or Utopic-OK
models, you will hear a long beep and then a short beep. On
Utopic-2 models, remove the cover and hold down the white
button on the electronic circuit board or the blue button on some
models, and then a short beep will sound.
2-After the short beep, touch the palm of your hand to wake up
the keypad and touch the 'LOCK' button.
3-If the pairing is successful, sequential warning sounds will be
heard from the smart lock.
To Next Page
Loading...