Need help?Do you have a question about the Designers Fountain ASTREA and is the answer not in the manual?
General| Brand | Designers Fountain |
|---|---|
| Model | ASTREA |
| Category | Fan |
| Language | English |
Manufacturer warrants fan motor for life, light kit for 3 years, other parts for 1 year, excluding glass/blades.
Warranty excludes improper installation, misuse, accidents, alterations, weathering, and labor costs.
Secure the mounting bracket to the outlet box using mounting screws and washers.
Remove pins and loosen ball set screw before removing the hanger ball.
Thread rod onto motor, align holes, insert clevis pin and cotter pin, tighten set screws.
Thread wires through covers, push motor cover, insert straight pin and hanger ball.
Lift hanger ball through bracket opening and seat it in the bottom of the bracket.
Align bracket bump with hanger ball notch, insert receiver, connect wires using nuts.
Align canopy screw with keyhole slot, rotate canopy, thread and tighten screws.
Affix blades to motor using blade washers and screws.
Align plate holes with motor holes and secure with plate screws.
Connect quick connector, align light kit holes with plate, and secure with screws.
Downward airflow creates a cooling effect.
Upward airflow moves warmer air off the ceiling area.
Download the Smart Life app, connect to 2.4G Wi-Fi, and grant necessary permissions.
Use voice commands with Alexa or Google Assistant to control fan power, speed, direction, and light.
Learn how to operate the fan and light using the provided remote control icons and functions.
Check breakers, fuses, wire connections, and ensure all screws are snug and tight.
Allow break-in period, secure glass shade, ensure clearance from ceiling, check box security.
Verify blade and arm screws are secure, run fan for 10 minutes for self-adjustment.
Verify network is 2.4 GHz Wi-Fi and ensure correct pairing procedure.
Ensure remote is bound, fan is not in pairing mode, and pairing is successful.
To Next Page