© Radionics Inc. reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties.
71
Timer Programming
PA 0191-0196
DS7400Xi Panel Wiring & Programming
Bell Cutoff Times are programmed in One-Minute intervals, except that an
entry of “99” produces a 30-second bell cutoff.
Entry and Exit Delay Times are programmed in 5-second intervals, as
follows:
01 = 5 sec.
03 = 15 sec.
04 = 20 sec.
06 = 30 sec.
12 = 60 sec.
51 = 255 sec. [Maximum Programmable]
To Next Page
