Need help?Do you have a question about the Detnov CCD-103 and is the answer not in the manual?
General| Brand | Detnov |
|---|---|
| Model | CCD-103 |
| Category | Industrial Electrical |
| Language | English |
Describes the division of the panel into detection and extinction areas.
Lists all material that should be inside the equipment package.
Specifies environmental and installation conditions for the panel.
Lists basic tools needed for panel installation.
Details the procedures for installing the panel, including cover removal and fixing.
Guides on connecting detectors to the 3 zones of the panel.
Details connections for the extinction bottle output and related functions.
Lists checks to perform before connecting the mains supply for system startup.
Outlines the correct order for connecting power supplies (mains and batteries).
Describes quick tests to perform to verify system functionality after startup.
Explains the meaning of various LED indicators on the control panel.
Explains the different acoustic warnings emitted by the panel.
Details the functions of the various control keys on the panel.
Describes the different operating modes for the detection block.
Outlines the three operating modes for the extinction block.
Details the states of the extinction process: Sleep, Pre-activated, Activated, Triggered.
Configures the delay between activated and triggered states of extinction.
Sets the elapsed time between triggered state and end of triggering.
Configures the function of the door input, e.g., stopping extinction.
Configures the self-check behavior for the first alarm.
Defines functions for the external input, like sounder control.
Sets priority between manual trigger and other buttons.
Configures the delay for manual triggering of extinction.
Defines whether the reset key is functional during triggering.
Configures combinations of zones to trigger the automatic extinction process.
Configures how cross-level detection affects the panel (fault or alarm).
Configures the resting state of the external input (NC or NA).
Configures the resting state for bottle 1 surveillance.
Configures the resting state for bottle 2 surveillance.
Allows disabling battery fault warnings.
Allows disabling main power fault warnings.
Configures the activation of the optical indicator based on mode or flow input.
To Next Page