This machine must only
be connected
to an AC frequency at the
electrical voltage shown
on the motor
plate
(220-24AVl5O
Hz, single-phase)
.
To
prevent
electric
shock keep the machine in a
dry
place.
.
Do not expose
the machine to rain.
.
The machine cable
and connection
plugs
must be
in
per-
fect condition.
.
Unplug
the machine after
use.
.
The machine must
be connected to a
grounded
electrical
circuit in order
to
protect
the operator from electric
shocks.
.
Make sure that
you
are connecting
the machine
to
220-
240V.
.
When connectingto
22O-240V make sure that the electri-
cal circuit in the house
or building is
grounded.
.
Do not cut, remove
or break
the
ground
pin.
.
Do not use a machine
with a
damaged
plug
or cable.
.
Do not use the
machine
if the on-off switch doesn't work
correctly.
.
Avoid reductions
in voltage,
use 3 x 1,5 mm of section
cables measuring
no
longer than
30
metres.
13
To Next Page
Loading...