DEVAISE Smart Lock - User Manual

Need help?

Do you have a question about the DEVAISE Smart Lock and is the answer not in the manual?

Summary

Smart Lock Battery and Operation Guide

Change Button Battery

Instructions for replacing the battery by using a needle to eject the battery holder.

Unlock Operation

Details on unlocking the smart lock using default or management passwords and the knob.

Lock Operation

Instructions to lock the smart lock by rotating the knob.

Password Setting

Procedure for changing the current user or management password.

Advanced Settings and Features

Public Mode and Temporary Password

Guide for turning on public mode and setting temporary passwords.

Turn Off Public Mode

Instructions on how to disable the public mode for the smart lock.

Fake Pin Code Function

Instructions for enabling or disabling the Fake Pin code security feature.

Smart Lock Features and Troubleshooting

Decode and Anti-Theft Features

Information on password recovery and anti-theft functionalities.

Common Problem Solutions

Troubleshooting common issues like lock not opening or indicator signals.

This document describes a smart lock, providing instructions for its operation, setting, and maintenance.

Function Description

The smart lock is designed for secure access control, featuring multiple unlocking methods and security features. It primarily operates using a numerical keypad for password entry. The lock includes indicators for low voltage, unlocking status, and locking status, providing visual feedback to the user.

Important Technical Specifications

Password Length: Passwords can consist of 4 to 15 digits.
Battery: The lock is equipped with "CR2032" batteries.
Anti-Theft Technology: Incorporates Fake PIN password function to prevent real password exposure.
Auto-Alarm: Activates after 4 incorrect password attempts, disabling the lock for 60 seconds.
Power Shortage Prompt: A locking indicator light illuminates when the voltage is very low, indicating the lock cannot be operated.
Password Retention: The last password is not lost when changing batteries.

Usage Features

1. How to Change the Button Battery:

Insert a needle vertically into the designated hole.
Press the needle to eject the battery holder.
Place the button battery with the cathode side inward into the holder.
Reinsert the battery holder into the lock body.

2. Lock & Unlock:

Unlock:
- Input the factory default user password "1234+OK" or the management password "4321+OK".
- A long "di..." sound will be heard, and the unlocking indicator light will turn on.
- Rotate the knob within 3 seconds to open the lock.
- Note: Incorrect passwords will trigger an alarm sound ("di.. di.. di..") 3 times. A flashing signal indicates low voltage. If unlocked using the management password, the user password will revert to "1234".
Lock:
- Rotate the knob back to the locked position.

3. Setting (Change Password):

Input the current user password "1234+OK" or management password "4321+OK".
A long "di..." sound will be heard, and the unlocking indicator light will turn on.
Press "OK" for at least 2 seconds; the unlocking indicator light will twinkle.
Input the new password (4-15 digits).
Press "OK". A long "di..." sound confirms the password change.
Note: The management password cannot be the same as the user password.

4. Turn On Public Mode, Set Temporary Password:

Turn on Public Mode:
- Input the current management password + OK. A long "di..." sound will be heard, and the unlocking indicator light will turn on.
- Press "OK" for at least 2 seconds; if the unlocking indicator light twinkles, press "OK" again.
- Input "4,4" and press "OK". A long "di..." sound confirms public mode is set.
Set Temporary Password:
- Press "OK". The unlocking indicator light will twinkle.
- Input the new temporary password (4-15 digits).
- Press "OK". A long "di..." sound confirms the temporary password is set, and the unlocking indicator light will turn on.
- Note: Temporary passwords can only be used once.

5. Turn Off Public Mode:

Input the current management password + OK. A long "di..." sound will be heard, and the unlocking indicator light will turn on.
Press "OK" for at least 2 seconds; if the unlocking indicator light twinkles, press "OK" again.
Input "4,3" and press "OK". A long "di..." sound confirms public mode is turned off.

6. Turn On/Off Fake PIN Code Function:

Input the current management password + OK. A long "di..." sound will be heard, and the unlocking indicator light will turn on.
Press "OK" for at least 2 seconds; if the unlocking indicator light twinkles, press "OK" again.
To turn on: Input "4,2" and press "OK". A long "di..." sound confirms Fake PIN code mode is turned on.
To turn off: Input "4,1" and press "OK". A long "di..." sound confirms Fake PIN code mode is turned off.

7. Decode Function:

If the password is forgotten, the decode number can be obtained by providing the code on the lock body or by using a USB-KEY with the distributor.
This process will reset the management password to "4321" and the user password to "1234".

Maintenance Features

Troubleshooting Common Problems:

Problem: Inputting the password results in an alarm ("di..di..di.."), but the lock cannot be opened.
- Primary Cause: The password is wrong.
- Solution: Refer to the decode method to reset the password.
Problem: Inputting the password results in an alarm ("di..di..") twice, the lock shows a signal, and the unlocking indicator light twinkles twice.
- Primary Cause: Too low voltage.
- Solution: Replace the batteries (refer to page 1 for instructions).
Problem: Inputting the password results in an alarm ("di..di.."), the signal is on, but the lock cannot be opened.
- Primary Cause: The knob is not in the right position.
- Solution: Turn the knob to the right position.
Problem: Touching the button produces no sound, but the lock can still be opened.
- Primary Cause: Buzzer is broken.
- Solution: Change the buzzer.

DEVAISE Smart Lock Specifications

General

Brand	DEVAISE
Model	Smart Lock
Category	Locks
Language	English