EasyManua.ls Logo

DEVANTI ZB-250 - Initial Setup and Safety; Product Functions; First Use and Installation Guidelines; General Safety Precautions

DEVANTI ZB-250
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 3 -
3 Filter Connector option
4 Adaptor
1
5
Water Follow
Controller
1
6
Filling Water
Pipe(1m)
1
7
Filling Water
Pipe(40cm)
1
8 Ice Scoop 1
Function
I
nstant making ice
Ice full alarming,add water water alarming
Crystalline ice in square
Before/First Use of Your Ice Maker
1.D
uring transportation, the incline angle of the cabinet should not be over 45° .Do not turn t
he
I
ce maker upside down. As this may damage the compressor and sealed system.
2.Remove all packing material and carefully check your ice maker to ensure it is in go
od
c
ondition and that there is no damage to the ice maker or power cord and plug.
3The ice maker should be placed horizontally on a level surface. To ensure proper ventilation for
your ice maker allows 150mm of space at the top, the back and on each side. Do not install
the Ice maker near an oven, radiator, or any other heat source.
4.Before using the Ice maker for the first time, please wait 2 hours after positioning it, and keep
t
he front lid opens for at least 2hours
5.Ensure th
at the voltage indicated on the ice maker corresponds with the voltage in your home.
6.Pure water is not allowed to be used on this unit, spring water is recommended.
Safety Notes

Related product manuals