Develop ineo+ 258 - Page 13

13
13
Product Guide
ineo+ 258/C308/C368
Product Guide ineo+ 258/308/368
PK-520 Punch kit
(Europe/Sweden)
OPTION for FS-534/SD
Punch method
On-line, page by page, 2 or 4 holes for Europe, 4 holes for Sweden
Hole diameter
6.5 mm ± 0,5 mm
Paper formats
A3, B4, A4 L, B5 L (200 mm x 330 mm)
Paper weights
52 - 300 gsm
Dimensions (W x D x H)
61 x 492 x 142 mm
Weight
1.8 kg
SD-511 Saddle kit unit
STANDARD for FS-534SD
Paper formats
A4 lengthwise / A3+ (311 x 457 mm)
Paper weights
Centre staple: 52 - 90 gsm
Half-fold: 52 - 209 gsm
(more than 91 gsm sheets can be used only as cover sheet)
Tri-fold: 52 - 90 gsm
Tray capacity
20 sets (1-3 pages), 5 sets (11-20 pages)
Tri-fold: 30 sets with 1 page, 10 sets with 2 or 3 pages
Stapling modes
Centre parallel 2-points (booklet staple)
Stapling capacity for centre stapling
20 sheets (52 - 90 gsm), 19 sheets + cover sheet (19 sheets 90 gsm + 1
sheet 209 gsm
Staples
SK-602
Dimensions (W x D x H)
210 x 556 x 547 mm
Weight
24 kg
Remark
One staple cartridge is packed to the saddle kit unit.
JS-506 Inner job separator
OPTION
Paper formats
Tray 1/2: A6 - SRA3
Banner and long length tray 2 only
Paper weights
52 - 300 gsm
Tray capacity
Tray 1: 100 sheets (90 gsm)
Tray 2: 150 sheets (90 gsm)
Dimensions (W x D x H)
491.9 x 469.5 x 226.5 mm
Weight
2.5 kg
Remark
Can’t be installed together with FS-533/534/SD.
Supports offset group/sort.