Problem Common cause Solution
Interference from equipment
using same frequency
It is always possible that nearby equipment
using the same or similar frequency range
will cause interference or signal drop-out.
Try using a different channel. Ensure that
there no obstructions between the
transmitter and receiver. Try reducing the
distance between the transmitter and
receiver.
Distorted sound Sound settings are not optimal Check the volume level and the settings of
other audio system components that may
be affecting the sound quality by over-
driving the signal.
The information included in this user manual is subject to change at any time and without notification:
Version: 1.0 Date and author initials: 04-08-2020 RV Revision date and author initials : -
To Next Page
Loading...
