26 dLAN network
devolo dLAN 500 AVplus
Excluding a dLAN 500 AVplus from your network
(fig 6)
To exclude a dLAN 500 AVplus adapter from an exist-
ing network, press its encryption button for at least
ten seconds. The device will be assigned a new ran-
domly generated password and will thus no longer be
able to access the network. To integrate the adapter in
a different dLAN 500 AVplus network, follow the steps
described above, depending on whether you are set-
ting up a new network or adding the adapter to an ex-
isting one.
fig 6
To Next Page
Loading...