dLAN network 25
devolo dLAN 500 AVtriple+
Expanding an existing dLAN AV network with a
new dLAN 500 AVtriple+ (fig 4)
If you have already secured your existing dLAN AV net-
work using the encryption button, use the same meth-
od to integrate other adapters. Once you have
successfully connected the new dLAN 500 AVtriple+,
first press the encryption button of one of your net-
work’s existing adapters (1 second), then press the en-
cryption button of your new dLAN 500 AVtriple+
(1second) within two minutes.
That's it! The new dLAN 500 AVtriple+ is now integrat-
ed in your network. To integrate additional dLAN AV
adapters in your network, repeat the above steps.
To Next Page
Loading...
