7
햲 Take off the battery compartment cover and insert the included batteries in the correct position (see
marking in the battery compartment) into the Home Control Radiator Thermostat.
햳 When you have inserted the batteries correctly, the following symbol flashes on the display of the
Home Control Radiator Thermostat.
햴 Reattach the battery compartment cover. You can now continue with the installation on the radiator.
Installing the Home Control Radiator Thermostat
Only use the Home Control Radiator Thermostat indoors.
The Home Control Radiator Thermostat is compatible with most commercially available radiator valves. For this
purpose, two adapter rings are included with the Home Control Radiator Thermostat:
To Next Page
Loading...
