Need help?Do you have a question about the Devolo Magic 2 WiFi 6 and is the answer not in the manual?
General| Maximum Data Transfer Rate | 2400 Mbps |
|---|---|
| Ethernet Ports | 2 x Gigabit Ethernet |
| Frequency Bands | 2.4 GHz, 5 GHz |
| Product Type | Powerline Adapter |
| WiFi Speed | 1800 Mbps |
| MIMO | Yes |
| Plug Type | Type F |
| WiFi Standard | WiFi 6 (802.11ax) |
| Encryption | WPA3 |
| Range | 500 m (Powerline) |
| Features | Beamforming |
Download the devolo Home Network app for guided step-by-step configuration.
Note down the Wi-Fi key from the devolo Magic adapter for network setup.
Connect the devolo Magic WiFi adapter to a wall socket and observe the LED status.
Press the LAN adapter button within 3 minutes of connecting it to the router to initiate pairing.
Monitor the encryption process via flashing white LEDs on both adapters.
Verify setup completion when all LEDs show solid white, typically within 3 minutes.
Establish the Wi-Fi connection on your smartphone to finalize the installation.
Connect the adapter near the router to transfer Wi-Fi access data for optimal coverage.
Press the adapter button and then the router's WPS button within 2 minutes to pair.
Successful pairing is confirmed when all LEDs display solid white.
Disconnect and position the adapter for the best possible internet connection.
If automatic pairing fails, perform manual pairing by connecting the adapter and waiting for the LED.
Press the LAN adapter button, then the WiFi adapter LED, to complete manual pairing.
To Next Page
