Devolo Mesh WiFi 2 User Manual

Wi-Fi button
Wi-Fi LED The devolo Mesh WiFi adapter ... LED behaviour
Duration of the
button press
Action
... has a fault-free connection to the Internet.
LED behaviour
Lights up white
Flashes white
O
1 second
> 3 seconds
WPS function is being carried out
... is attempting to establish a connection via WPS.
... no longer has any LED function since it was disabled by
the user.
* On page 35 you will see how to carry out manual pairing.
Wi-Fi is being switched o
Flashes white
LED goes out
| EN |
PLC button
PLC LED The devolo Mesh WiFi adapter ... LED behaviour
Duration of the
button press
Action LED behaviour
Lights up white
Quickly ashes white
Lights up white and then briey
ashes red
Lights up red
None
Slowly ashes white
Alternately ashes white and red
1 second
> 10 seconds
Start pairing with other devolo adapters
... is working perfectly. It is connected to other devolo
adapters.
... is currently establishing a pairing connection with
another adapter.
... has a poor Powerline connection.
... is currently in the start-up process.
... cannot see any other devolo adapters.
... no longer has any LED function since it was disabled by
the user.
... is not connected to the network*
... is in standby mode.
... is currently undergoing a software update.
Reset devolo adapter to factory settings
Flashes white
Lights up red
Flashes red
2019

Devolo Mesh WiFi 2 Specifications

General

WiFi Standard	Wi-Fi 5 (802.11ac)
Frequency Bands	2.4 GHz, 5 GHz
Mesh Technology	Yes
Ethernet Ports	1 x Gigabit Ethernet
Wireless Speed	Up to 1200 Mbps
MIMO	Yes
Security	WPA2
Plug Type	EU Plug