How to fix DeWalt Blower that won't start?
If your DeWalt Blower won't start, first, ensure the battery is correctly installed. Next, verify the battery meets the charging requirements. Finally, check that the battery-select switch is not in the "OFF" position.
What to do if my DeWalt DCBL590 Blower battery won’t charge?
If the battery of your DeWalt Blower won’t charge, make sure there is a battery in the selected battery port. Insert the battery into the charger until the red charging light comes on. If the battery is completely drained, allow it to charge for up to 8 hours. Ensure the charger is plugged into a working outlet, and verify that the receptacle isn't controlled by a light switch. Also, move the charger and tool to an environment with a surrounding air temperature between 40 °F (4.5 °C) and 105 °F (40.5 °C).
Detailed safety precautions for handling and using lithium-ion battery packs, including fire hazards.
Step-by-step guide on how to plug in and insert the battery pack for charging.
Guides on how to insert and remove battery packs from the tool.
Instructions on how to turn the blower on and off using the battery-select switch and trigger.
To Next Page
General
