DeWalt DCF512 - Page 17

17
ENGLISH
Package Contents
The package contains:
1 Ratchet
1 Battery charger
1 Li‑Ion battery pack (C1, D1, E1, G1, H1, L1, M1, P1, Q1, S1, T1,
U1, X1, Y1, Z1 models)
2 Li‑Ion battery packs (C2, D2, E2, G2, H2, L2, M2, P2, Q2, S2, T2,
U2, X2, Y2, Z2 models)
3 Li‑Ion battery packs (C3, D3, E3, G3, H3, L3, M3, P3, Q3, S3, T3,
U3, X3, Y3, Z3 models)
1 Instruction manual
NOTE: Battery packs, chargers and storage are not included
with N models. Battery packs and chargers are not included with
NT models. Bmodels include Bluetooth® batterypacks.
NOTE: The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth®, SIG, Inc. and any use of
Battery Type
These battery packs may be used: DCB181, DCB182, DCB183,
DCB183B, DCB183G, DCB184, DCB184B, DCB184G, DCB184LR,
DCB185, DCB187, DCB189, DCBP034, DCBP034G, DCBP518,
DCBP518G, DCB546, DCB547, DCB547G, DCB548. Refer to
Technical Data for moreinformation.
Residual Risks
In spite of the application of the relevant safety regulations
and the implementation of safety devices, certain residual risks
cannot be avoided. These are:
• Impairment ofhearing.
• Risk of personal injury due to flyingparticles.
• Risk of burns due to accessories becoming hot duringoperation.
• Risk of personal injury due to prolongeduse.
SAVE THESE INSTRUCTIONS
Safety Instructions for Ratchet Tools
• Hold power tool by insulated gripping surfaces, when
performing an operation where the fastener may contact
hidden wiring. Fasteners contacting a "live" wire may make
exposed metal parts of the tool "live" and could give the operator
an electricshock.
• Use clamps or another practical way to secure and
support the workpiece to a stable platform. Holding the work
by hand or against your body leaves it unstable and may lead to
loss ofcontrol.
• Air vents often cover moving parts and should be avoided.
Loose clothing, jewelry or long hair can be caught in movingparts.
• Do not operate this tool for long periods of time. Vibration
caused by tool action may be harmful to your hands and
arms. Use gloves to provide extra cushion and limit exposure by
taking frequent restperiods.
• Accessories and tools get hot during operation. Wear
gloves when touchingthem.
6) Service
a ) Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool ismaintained.
b ) Never service damaged battery packs. Service of
battery packs should only be performed by the manufacturer or
authorised serviceproviders.
b ) Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with the
switch is dangerous and must berepaired.
c ) Disconnect the plug from the power source and/or
remove the battery pack, if detachable, from the power tool
before making any adjustments, changing accessories, or
storing power tools. Such preventive safety measures reduce the
risk of starting the power toolaccidentally.
d ) Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power tools are
dangerous in the hands of untrainedusers.
e ) Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the power
tool’s operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly maintained
powertools.
f ) Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to bind and
are easier tocontrol.
g ) Use the power tool, accessories and tool bits, etc. in
accordance with these instructions, taking into account the
working conditions and the work to be performed. Use of
the power tool for operations different from those intended could
result in a hazardoussituation.
h ) Keep handles and grasping surfaces dry, clean and
free from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control of the tool in
unexpectedsituations.
5) Battery Tool Use and Care
a ) Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of battery
pack may create a risk of fire when used with another batterypack.
b ) Use power tools only with specifically designated
battery packs. Use of any other battery packs may create a risk of
injury andfire.
c ) When battery pack is not in use, keep it away from other
metal objects, like paper clips, coins, keys, nails, screws
or other small metal objects, that can make a connection
from one terminal to another. Shorting the battery terminals
together may cause burns or afire.
d ) Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally occurs,
flush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause irritation
orburns.
e ) Do not use a battery pack or tool that is damaged
or modified. Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion or risk ofinjury.
f ) Do not expose a battery pack or tool to fire or excessive
temperature. Exposure to fire or temperature above 130°C may
causeexplosion.
g ) Follow all charging instructions and do not charge
the battery pack or tool outside the temperature range
specified in the instructions. Charging improperly or at
temperatures outside the specified range may damage the battery
and increase the risk offire.