Need help?Do you have a question about the DeWalt DCF850 and is the answer not in the manual?
General| Max Torque | 1, 825 in-lbs |
|---|---|
| Max Torque (Nm) | 206 Nm |
| LED Light | Yes |
| Anvil Type | 1/4" quick release hex shank |
| Power Tool Type | Cordless |
| Motor Type | Brushless |
| Variable Speed | Yes |
| Voltage | 20V |
| No Load Speed | 0-3250 RPM |
| Impacts per Minute | 0-3800 IPM |
| Weight | 2.1 lbs |
| Battery Type | Lithium-Ion |
Definitions of signal words (DANGER, WARNING, CAUTION, NOTICE) and associated symbols used in the manual.
Ensures safe operation by maintaining a clean and well-lit work area, avoiding explosive atmospheres, and keeping bystanders away.
Covers precautions like matching plugs, avoiding earthed surfaces, and protecting against water and damaged cords.
Emphasizes staying alert, using PPE, preventing unintentional starts, and proper handling to avoid injury.
Guidelines for using the correct tool, maintenance, proper storage, and safe operation practices.
Covers safe charging, usage with designated packs, storage, handling damaged packs, and temperature precautions.
Guidelines for professional servicing of the power tool and prohibiting service of damaged battery packs.
Specific safety rules for impact drivers, including handling hidden wiring and residual risks.
Covers charger safety warnings, electrical safety, and extension cable usage.
Describes the meaning of different LED lights (Charging, Fully Charged, Hot/Cold Pack Delay) on the charger.
Explains the charger's function to delay charging for battery packs that are too hot or too cold.
Critical safety instructions for handling, charging, and storing battery packs to prevent injury or fire.
Safety guidelines for transporting batteries, including fire hazards and regulatory compliance.
Explains FLEXVOLTâ„¢ battery operation in Use and Transport modes, including voltage and shipping considerations.
Covers storage recommendations, labels, compatible battery types, and package contents for the tool.
Identifies and describes the main components of the impact driver, including trigger, chuck, and handles.
Step-by-step instructions for installing and removing the battery pack from the tool.
Describes proper hand position, variable speed trigger, forward/reverse control, mode selector, worklights, and Precision Drive.
Details maximum torque, operational steps, and factors influencing fastening torque like battery voltage and socket size.
States that the power tool requires no additional lubrication.
Instructions for cleaning the tool, emphasizing dry air, approved eye protection, and avoiding solvents or liquids.
To Next Page
