EasyManuals Logo

DeWalt DCFS950 Original Instructions

DeWalt DCFS950
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
4
ENGLISH
English (original instructions)
CORDLESS FENCING STAPLER
DCFS950
Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough
product development and innovation make DeWALT one of the
most reliable partners for professional power toolusers.
Technical Data
DCFS950
Voltage V
DC
18
Type 1
Battery type Li-Ion
Magazine angle 0°
Loading capacity up to 38 staples
Length of staples mm 40–50
Staple thickness mm 3.7–4
Weight (without battery pack) kg 4.2
Noise values and vibration values (triax vector sum) according to EN60745-2-16
L
PA
(emission sound pressure level) dB(A) 87
L
WA
(sound power level) dB(A) 98
K (uncertainty for the given sound level) dB(A) 3
Vibration emission value a
h
= m/s
2
3.8
Uncertainty K = m/s
2
1.5
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN60745 and may be used to compare one tool with another. It
may be used for a preliminary assessment ofexposure.
WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total workingperiod.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total workingperiod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of workpatterns.
EC-Declaration of Conformity
Machinery Directive
Cordless Fencing Stapler
DCFS950
DeWALT declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-16:2010.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact DeWALT at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf ofDeWALT.
Markus Rompel
Vice-President Engineering, PTE-Europe
DeWALT, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
26.01.2017
WARNING: To reduce the risk of injury, read the
instructionmanual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
thesesymbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
seriousinjury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
seriousinjury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderateinjury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
propertydamage.
Denotes risk of electricshock.
Denotes risk offire.
GENERAL POWER TOOL SAFETY WARNINGS
WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this

Other manuals for DeWalt DCFS950

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DeWalt DCFS950 and is the answer not in the manual?

DeWalt DCFS950 Specifications

General IconGeneral
Product typeStaple gun
Magazine typeAngled magazine
Product colorBlack, Yellow
Power sourceBattery
Battery voltage18 V
Battery capacity5 Ah
Magazine capacity-
Battery includedYes
Number of batteries included2 pc(s)
Weight and Dimensions IconWeight and Dimensions
Weight4700 g

Related product manuals