Need help?Do you have a question about the DeWalt DCM563PB and is the answer not in the manual?
Details on battery packs, types, voltage, capacity, weight, and charger models.
Measured sound pressure, sound power levels, and vibration values.
Explains DANGER, WARNING, CAUTION, NOTICE.
Lists directives and standards the product complies with.
Emphasizes reading warnings and instructions.
Keep work area clean and well lit.
Do not operate in explosive areas.
Keep children and bystanders away.
Power tool plugs must match the outlet.
Avoid body contact with earthed surfaces.
Do not expose to rain or wet conditions.
Do not abuse the cord.
Use outdoor extension cords.
Use RCD for damp locations.
Be alert, not tired or under influence.
Wear eye protection, safety shoes, etc.
Ensure switch is off before connecting.
Remove adjusting keys/wrenches.
Do not overreach.
Avoid loose clothing and jewelry.
Connect and use dust extraction facilities.
Use the right tool for the application.
Do not use if switch is faulty.
Disconnect before changing accessories.
Keep out of reach of children.
Check for damage and repair if needed.
Sharp tools are easier to control.
Use according to instructions and conditions.
Recharge only with specified charger.
Use only with specified battery packs.
Keep away from metal objects.
Avoid contact with ejected liquid.
Service by qualified personnel with identical parts.
Keep body parts away from blade, carry with sheath.
Insulated grips, check for damage, store properly.
Do not use if switch faulty, never force blades.
Avoid hard objects, be aware of falling debris.
Not for persons with reduced capabilities, supervise children.
Contact with moving parts, prolonged use, hearing, dust.
Measured according to EN60745 for comparison.
Explains common pictograms found on the tool.
Describes the location and format of the date code.
Read instructions, follow cautionary markings.
Avoid liquid, use RCD, charge only DEWALT batteries.
Do not use with other chargers, avoid wet conditions.
Proper disconnection, cord placement, no extension cords.
Ensure proper ventilation, keep away from heat.
Lists compatible battery packs for the DCB115 charger.
Instructions for plugging in and inserting the battery.
Explains the meaning of charging lights.
Explains the feature for temperature management.
How the charger indicates a faulty battery or charger.
Tool turns off if system engages.
Avoid explosive atmospheres, do not force packs.
Avoid water, extreme temperatures, damage.
Do not incinerate, flammable liquid hazard.
Handling battery content leaks.
Comply with shipping standards (UN, IATA, IMDG, ADR).
Conditions for not being Class 9 Hazardous Material.
Protect terminals to prevent short circuits.
Lists compatible 18V Li-Ion battery packs.
Cool, dry place away from direct sunlight and extremes.
Explains common pictograms on labels.
Lists items included in the package.
Advise checking for damage during transport.
Names and identifies key parts of the tool.
Designed for professional trimming applications.
Not for children or persons with diminished capabilities without supervision.
Ensure battery and charger voltage match.
Charger is double insulated, no earth wire needed.
Replace damaged supply cords via service.
Connect live and neutral wires, no earth connection.
Minimum conductor size and maximum length.
Always unwind cable completely.
Turn off and disconnect battery before adjustments.
Use only DEWALT battery packs and chargers.
Align rails and slide until it snaps.
Press release button and pull.
How to check battery charge level.
Observe safety instructions and regulations.
One hand on switch handle, other on bail handle.
Squeeze bail handle, push lock-off, squeeze trigger.
Do not cut stems over 3/4 inch (19 mm).
Maintain balance, wear safety gear, hold with two hands.
Use sweeping motion, slight downward tilt.
Use a stretched string as a guide.
Start at bottom, sweep up.
Keep hands away from blades, read manual, check for objects.
Designed for long life with minimum maintenance.
Turn off and disconnect battery before adjustments.
Clean with solvent, apply light lubrication.
Use dry air for vents, wear PPE.
Avoid solvents, use damp cloth with mild soap.
Disconnect from outlet before cleaning.
Use only DEWALT recommended accessories.
Recycle lithium-ion cells, do not dispose with household waste.
To Next Page
General
