62
ENGLISH
LED Speaker Status Indicator
LED indicator Status/Mode
Steady blinking (half
second interval)
Speaker is unpaired or in
connecting mode.
Rapid Blinking Speaker is in pairing mode and
discoverable by your device.
Solid light Speaker is connected with a
device.
No light Speaker has timed out and/
or is off.
PAIRING SPEAKER WITH A BLUETOOTH
®
AUDIO DEVICE (FIG.3, 4)
1. Place the speaker and the Bluetooth
®
audio source within 1m (3.3')
of each other.
2. Turn speaker on by pressing the power button (a). The LED (b)
will light solid for 4 seconds to indicate the apparatus powered on
successfully and then go into a half second interval blink pattern.
3. Press the Bluetooth
®
pairing button (c). The LED indicator light blinks
rapidly indicating the speaker is in pairing mode and is discoverable
by your Bluetooth
®
device.
4. Confirm pairing on your device. (Please consult your device’s
instruction manual for specific pairing instructions.)
NOTE: If pairing is not confimed within 2 minutes, the LED will stop
flashing and the speaker will return to half second interval blink
pattern.
5. Once pairing is successful the LED indicator (b) will turn solid and the
speaker will emit a short tone. The speaker will now play music from
your device.
To Next Page
Loading...
