English
15
4. Press the forward or back arrow to select NO or
YES.
5. Press the OK button to save changes and exit.
Operating Tips
• UseonlyDeWALT 10.8 V lithium ion battery.
• EnsuretheDeWALT battery is in good working
condition. If the low battery indicator light on
the screen is flashing, the battery needs to be
recharged.
• Toextendbatterylife,makesuretoturnboth
the screen and the handle set off when not in
use.
• Makesurethescreenisfullychargedbefore
operation.
MAINTENANCE
Your DeWALT inspection camera has been designed
to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and
regular cleaning.
The charger and battery pack are not serviceable.
There are no serviceable parts inside.
Cleaning
WARNING: Blow dirt and dust off with
clean, dry air at least once a week. To
minimize the risk of eye injury, always
wear proper eye protection when
performing this.
WARNING: Never use solvents or
other harsh chemicals for cleaning the
non-metallic parts of the tool. These
chemicals may weaken the materials
used in these parts. Use a cloth
dampened only with water and mild
soap. Never let any liquid get inside the
tool; never immerse any part of the tool
into a liquid.
CHARGER CLEANING INSTRUCTIONS
WARNING: Shock hazard. Disconnect
the charger from the AC outlet before
cleaning. Dirt and grease may be
removed from the exterior of the charger
using a cloth or soft non-metallic brush.
Do not use water or any cleaning
solutions.
Optional Accessories
WARNING: Since accessories, other
than those offered by D
eWALT, have
not been tested with this product, use
of such accessories with this tool could
be hazardous. To reduce the risk of
injury, only D
eWALT recommended
accessories should be used with this
product.
RECOMMENDED ACCESSORIES
• DCT4101–17mmdiametercameracable
• DCT4102–9mmdiametercameracable
• DCT4105–5.8mmdiametercameracable
• DCT4103–17mmdiameter,0.9mlongcable
extension
• HookandmagnetDCT410(availableonlyas
spare parts)
• Hook,magnetandmirrorDCT411(available
only as spare parts)
Consult your dealer for further information on the
appropriate accessories.
Troubleshooting
• Makesurethe10.8Vbatteryischarged.
• Makesurethescreenisfullycharged.
• Makesurethescreenisalwaysattachedto
the handle set. The picture may freeze if you
attempt to remove the screen from the handle
set while taking a photo or video.
•Makesurethebatteryisinstalledonthehandle
set when in use.