11
USING THE LASER WITH ACCESSORIES (FIG. 2, INSET)
The laser is equipped with a 1/4" x 20 female thread (I) on the bottom of the unit. This
thread is to accommodate current or future D
EWALT accessories. Only use DEWALT
accessories specified for use with this product. Follow the directions included with the
accessory.
Recommended accessories for use with your tool are available at extra cost from
your local service center. If you need any assistance in locating any accessory, please
contact Stanley Black & Decker, 82 Taryn Drive, Epping, VIC 3076 Australia or call
1800 444 224 or (NZ) 0800 339 258.
To Next Page
Loading...
