38
ENGLISH
Single sliding table (fi g. A7)
This sliding table (38) allows for board sizes to the left of the blade up to
1200 x 900 mm.
The guide rods are mounted on a sturdy alloy extrusion which is quickly
detachable from the machine and yet fully adjustable is all planes.
The fence incorporates a full length measuring tape for quick positioning
of an adjustable stop and an adjustable support for narrow workpieces.
Double sliding table
This sliding table allows for board sizes to the left of the blade up to
1850 mm.
Saw bench guard
In countries where the Suva-type guard is a legal requirement, it is
supplied as standard. In other countries, it is available as an option.
Transporting
Always transport the machine in saw bench mode with the
upper blade guard fi tted.
● Remove the legs.
When carrying the machine, always seek assistance.
The machine is too heavy for one person to handle.
Maintenance
Your D E WALT power tool has been designed to operate over a long
period of time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Prior to maintenance always unplug the tool.
Lubrication
The bearings of the motor are pre-lubricated and watertight.
● Slightly oil the rotating table bearing surface where it slides on the lip
of the fi xed table at regular intervals.
● Clean the parts subject to accumulation of sawdust and chips
periodically with a dry brush.
Protecting the environment
Separate collection. This product must not be disposed of
with normal household waste.
Should you fi nd one day that your D
E WALT product needs replacement,
or if it is of no further use to you, do not dispose of it with household
waste. Make this product available for separate collection.
Separate collection of used products and packaging allows
materials to be recycled and used again. Re-use of recycled
materials helps prevent environmental pollution and reduces
the demand for raw materials.
Local regulations may provide for separate collection of electrical
products from the household, at municipal waste sites or by the retailer
when you purchase a new product.
D E WALT provides a facility for the collection and recycling of D E WALT
products once they have reached the end of their working life. To take
advantage of this service please return your product to any authorised
repair agent who will collect them on our behalf.
You can check the location of your nearest authorised repair agent by
contacting your local D
E WALT offi ce at the address indicated in this
manual. Alternatively, a list of authorised D
E WALT repair agents and
full details of our after-sales service and contacts are available on the
Internet at: www.2helpU.com
To Next Page
Loading...
