ENGLISH
9
FLIP-OVER SAW DW743N
Congratulations!
You have chosen a DEWALT tool. Years of experience, thorough
product development and innovation make DEWALT one of the most
reliable partners for professional power tool users.
Technical Data
DW743N DW743N DW743N
QS/GB LX DK
Voltage V 230 – 230
(UK & Ireland only) V 230/115 115 230/115
Type 2 2 3
Power input
230 V tools W 2,000 2,000 2,000
115–120 V tools W 1,700 1,700 1,700
No-load speed min
-1
2,850 2,850 2,850
Blade diameter mm 250 250 250
Blade bore mm 30 30 30
Blade body thickness mm 2.2 2.2 2.2
Blade tooth thickness mm 3 3 3
Riving knife thickness mm 2.3 2.3 2.3
Mitre (max. positions) left 45° 45° 45°
right 45° 45° 45°
Bevel (max. positions) left 45° 45° 45°
Automatic blade brake time s < 10 < 10 < 10
Weight kg 37 37 37
Cutting capacities
Mitre saw mode (fig. b)
Cutting angle Size of material Notes
H mm B mm
Workpiece
place against
fence (X)
Straight cross-cut 20 180 No packaging
piece required
30 176
40 170
68 140
85 26 Cross-cut at
max. height
Table turned 45° right for mitre cuts 70 95
Table turned 45° left for mitre cuts 20 130
Sawhead tilted 45° left for bevel cuts 50 140
Bench Saw mode
Max. ripping capacity left/right mm 210/210 210/210 210/210
Depth of cut at 90° mm 0–70 0–70 0–70
Depth of cut at 45° mm 0–32 0–32 0–32
L
PA
(sound pressure) dB(A) 93 93 93
K
PA
(sound pressure uncertainty) dB(A) 3 3 3
L
WA
(sound power) dB(A) 106 106 106
K
WA
(sound power uncertainty) dB(A) 2.9 2.9 2.9
Vibration total values (triax vector sum) determined according to EN 61029-1
and EN 61029-2-11.
Vibration emission value a
h
a
h
=
m/s²
2.0 2.0 2.0
Uncertainty K = m/s²
1.5 1.5 1.5
The vibration emission level given in this information sheet has been
measured in accordance with a standardised test given in EN 61029
and may be used to compare one tool with another. It may be used for
a preliminary assessment of exposure.
WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure level
over the total working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job. This
may significantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of
work patterns.
Fuses:
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
U.K. & Ireland 115 V tools 16 Amperes, mains
NOTE: This device is intended for the connection to a power supply
system with maximum permissible system impedance Zmax of 0.30 Ω
at the interface point (power service box) of user’s supply.
The user has to ensure that this device is connected only to a power
system which fulfils the requirement above. If necessary, the user can
ask the public power supply company for the system impedance at the
interface point.
Defi nitions: Safety Guidelines
The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.
DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
NOTICE: Indicates a practice not related to personal
injury which, if not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
Denotes sharp edges.
EC-Declaration of Conformity
MACHINERY DIRECTIVE
DW743N
DEWALT declares that these products described under “technical data”
are in compliance with:
2006/42/EC, EN 61029-1, EN 61029-2-11.
These products also comply with Directive 2004/108/EC. For more
information, please contact DEWALT at the following address or refer to
the back of the manual.
The undersigned is responsible for compilation of the technical file and
makes this declaration on behalf of DEWALT.
To Next Page
Loading...
