DeWalt DW872 - Page 23

23
ENGLISH
TOOTHED CHOPSAW DW872
Congratulations!
You have chosen a DEWALT power tool. Years of
experience, thorough product development and
innovation make DEWALT one of the most reliable
partners for professional power tool users.
Technical data
DW872
Voltage V 230
(U.K. & Ireland only) V 230/115
Power input W 2,200
No-load speed min
-1
1,300
Blade diameter mm 355
Blade bore mm 25.4
Blade body thickness mm 1.8
Blade kerf thickness mm 2.2
No. of blade teeth 70
Cross-cutting capacity at 90°
circular mm 130
square mm 100 x 100
rectangular mm 75 x 130
angular mm 92 x 92
Cross-cutting capacity at 45°
circular mm 79
square mm 79 x 79
rectangular mm 79 x 123
angular mm 56 x 56
Weight kg 22.5
Fuses:
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Denotes risk of electric shock.
Fire hazard.
Sharp edges.
EC-Declaration of conformity
DW872
DEWALT declares that these power tools have been
designed in compliance with: 98/37/EEC,
89/336/EEC, 73/23/EEC, EN 55014-2, EN 61029,
EN 55014, EN 61000-3-2 & EN 61000-3-3.
For more information, please contact DEWALT at the
address below, or refer to the back of the manual.
Level of sound pressure according to 86/188/EEC &
98/37/EEC, measured according to EN 61029:
DW872
L
pA
(sound pressure) dB(A)* 95
L
WA
(acoustic power) dB(A) 108
* at the operator’s ear
Take appropriate measures for the
protection of hearing if the sound
pressure of 85 dB(A) is exceeded.
Weighted root mean square acceleration value
according to EN 61029:
DW872
< 2.5 m/s
2
Director Engineering and Product Development
Horst Großmann
DEWALT, Richard-Klinger-Straße 40,
D-65510, Idstein, Germany
DW872.P65 10-09-2001, 16:2623