DeWalt DWST1-81078 - Product Features and Operation; Key Features; Instructions for Use; Charging a Battery Pack

8
ENGLISH
On Screen Battery Status Popup
When charging a battery pack, a large battery image is displayed in the
center of the LCD screen showing the battery pack charging status.
Green
Battery pack is fully charged
Yellow
Battery pack is partially charged
Red
Battery pack is empty
Cyan and Red
Hot/Cold Delay
This charger has a hot/cold delay feature: when the
charger detects a battery that is hot, it automatically
starts a delay, suspending charging until the battery has
cooled. After the battery has cooled down, the charger
automatically switches to the pack charging mode. This
feature ensures maximum battery life.
LED Indicators
Battery LED
A three‑color LED indicates the battery pack status
Green Battery pack is fully charged
Red Battery pack is partially charged
Yellow Battery pack is empty
Slow Blink & Mains Adapter LED is on Battery is charging
Fast Red Blink Error/Faulty battery pack
Mains Adapter LED
A red LED indicates battery Mains Adapter
Red Mains Adapter Connected
Bluetooth® LED
A blue LED indicates the Bluetooth® status
Blue Bluetooth® connected to
Mobile App
Off Not connected (light does not
need to be on for connecting to
the device)
Charging a Battery Pack
The TSTAK™ CONNECT RADIO includes a large storage
compartment. This compartment also stores and protects the
AC/DC power adaptor when not in‑use.
1. Open the compartment to take out the AC/DC power
adaptor (see Fig.A).
2. Plug the charger AC/DC power adaptor into an appropriate
outlet and connect it to the TSTAK™ CONNECT RADIO
power‑in port before inserting the battery pack. The Mains
Adapter indicator LED will light inred.
3. Open the appliance cover by releasing its lockinglatch.
4. Insert the battery pack (not included) into the radio, making
sure the pack is securely held in the receptacle. The battery
indicator LED will blink continuously, indicating that battery
charging is inprocess.
5. The AC adapter LED lights in red. The battery LED will
light in accordance with battery charging status (Green,
Yellow,Red).
NOTE: Close the cover and check it is tightlyclosed.
OPERATION
Instructions for Use

WARNING: Always observe the safety instructions and
applicableregulations.

WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can causeinjury.
6. 5. The charging completion will be indicated by a steady
battery indicator LED. The pack is fully charged and may be
used at this time or left in thecharger.
Key Features
• FM‑stereo with manual/auto scanning and memory preset
ofstations.
• Advanced Digital Audio Broadcasting (DAB) with
information broadcast display bystation.
• Favorites – preset digital stations. 12DAB stations and
12FMstations.
• Bluetoothconnectivity.
• 3.5mm Auxiliary input jack for connecting external
audiodevices.
• USB power/charging port (5V/2.1A).
• Large Colour LCD illuminateddisplay.
• Illuminated, soft‑touchbuttons.
• Four mid‑range drivers and two subwoofers for rich
soundperformance.
• Volume control and sound toneadjustment.
• Heavy‑dutydesign.
• Compatible with any TSTAK™unit.
• Water and dust‑resistant – IP54tested.
• Smartphone/tablet Application for remote management of
theappliance.