DeWalt XR DCB094K User Manual

17
ENGLISH
C
Lubrication
Your USB charger requires no additionallubrication.
MAINTENANCE
Your USB charger has been designed to operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation depends upon proper care and
regularcleaning.

WARNING: To reduce the risk of serious personal injury, disconnect battery
pack before making any adjustments or removing/installing attachments or
accessories. An accidental start‑up can causeinjury.
The charger and battery pack are notserviceable.
Belt Clip ( Fig. C)

WARNING: To reduce the risk of serious personal injury, ensure the screw holding the
belt hook issecure.
IMPORTANT: When attaching or replacing the belt hook
10
, to the DeWALT USB charger, use
only the screw
11
that is provided. Be sure to securely tightenscrew.
If the hook is not desired at all, it can be removed from the DeWALT USBcharger.
To remove the belt hook, remove the screw
11
that holds the belt hook inplace.
NOTE: Do not plug in devices that exceed the output ratings on the power source’s
label. Doing so will shorten the USB charger's usefullife.
DeWALT batteries will charge, via the USB Type C port from most USB power supplies. Some
power supplies may require a different cable not supplied with this kit, and may charge at
a slowerrate.
Charging a Device
Insert a USB plug into the USB Type‑A port
4
or bi‑directional USB Type‑C port
5
to supply
power or charge yourdevices.
NOTE: There will be no LED indication while supplying power to or charging user devices.
LEDs will only illuminate when charging DeWALTbatteries.
NOTE: The USB ports will shut down and the yellow LED will blink if the battery pack
temperture is out of acceptablerange.
***
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and
othercountries.
****
Apple is a trademark of AppleInc.

DeWalt XR DCB094K Specifications

General

Brand	DeWalt
Model	XR DCB094K
Category	Battery Charger
Language	English