EasyManuals Logo

DeWalt XR DCB118 User Manual

DeWalt XR DCB118
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
5
ENGLISH
These chargers are not intended for any uses other
than charging DeWALT rechargeable batteries.
Any other uses may result in risk of fire, electrical shock
orelectrocution.
Do not expose charger to rain orsnow.
Pull by plug rather than cord when disconnecting
charger. This will reduce risk of damage to electric plug
andcord
Make sure that cord is located so that it will not be
stepped on, tripped over, or otherwise subjected to
damage orstress.
Do not use an extension cord unless it is absolutely
necessary. Use of improper extension cord could result in
risk of fire, electric shock, or electrocution.
Do not place any object on top of charger or place
the charger on a soft surface that might block the
ventilation slots and result in excessive internal heat.
Place the charger in a position away from any heat source.
The charger is ventilated through slots in the top and the
bottom of thehousing.
Do not operate charger with damaged cord or plug —
have them replacedimmediately.
Do not operate charger if it has received a sharp blow,
been dropped, or otherwise damaged in any way. Take
it to an authorised servicecentre.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DeWalt XR DCB118 and is the answer not in the manual?

DeWalt XR DCB118 Specifications

General IconGeneral
Fan-CooledYes
Weight1.2 kg
Battery ChemistryLi-Ion
Input Voltage120V AC
Charging Ports1
CompatibilityXR Li-Ion batteries 18V and FLEXVOLT batteries 18V/54V
Charging Current8.0 A
Charger TypeFast Charger
Dimensions180 x 90 x 80 mm

Related product manuals