To Next PageTo Next Page
Need help?Do you have a question about the Dexter Laundry 1500RH2-50.5 and is the answer not in the manual?
General| Model | 1500RH2-50.5 |
|---|---|
| Category | Rotary Hammer |
| Voltage | 110 V |
| Drilling Capacity in Concrete | 50 mm |
| Drilling Capacity in Steel | 13 mm |
| Power Source | Electric |
| Power | 1.5 kW |
The primary rotary hammer tool (A x1).
Includes auxiliary handle (B x1) and various bits (C, D, E, F, G, H).
Reference to assembly instructions on pages 6-12.
Reference to usage instructions on pages 13-17.
Explanation of warning, power status, and mode icons.
Instructions on inserting and locking drill bits into the chuck.
Guide to fitting the auxiliary handle onto the rotary hammer.
Instructions for adjusting the auxiliary handle's position.
Steps for mounting the interchangeable drill chuck.
Guide to choosing between drilling, hammer drilling, and chiseling modes.
Specifies the maximum bit size for drilling (13 mm).
Procedure for safely plugging the tool into an electrical outlet.
Mandatory safety gear: eye protection, mask, gloves.
Using the trigger for controlled speed adjustments.
Steps for drilling into materials with the rotary hammer.
Specific guidance for drilling through brick material.
Instructions for drilling into general wall surfaces.
How to apply grease to the drill bit shank.
Periodic maintenance for the tool's gearbox with specific grease.
Visual examples of drilling into brick and wall, and chiseling.
Guidelines for responsible recycling and disposal of the product.
