Need help?Do you have a question about the Dexter Laundry DTCH 80 V and is the answer not in the manual?
General| Model | DTCH 80 V |
|---|---|
| Category | Dryer |
| Type | Tumble Dryer |
| Heating System | Electric |
| Control Type | Microprocessor |
| Drum Material | Stainless Steel |
| Exterior Material | Galvanized Steel |
| Door | Reversible |
| Programs | Multiple |
| Cool Down Cycle | Yes |
| Heat Source | Electric |
| Voltage | 208-240V |
| Phase | 3 Phase |
| Vending Option | Available |
Details the specific dryer model and its maximum dry weight capacity.
Provides cabinet and cylinder dimensions, and required installation clearances.
Lists electrical voltage, amperage, phase, and gas input specifications.
Covers uncrating, clearances, make-up air, gas, and exhaust installation.
Step-by-step instructions for starting and running a dry cycle.
Explains the function of touch pads, indicator lights, and the numeric display.
Illustrates the electrical connections and component layout of the dryer.
Provides a comprehensive view of all wiring harnesses and connections.
Instructions for servicing the clothes door, door switch, and thermostats.
Covers servicing the ignition module, electrodes, gas valve, and burners.
Procedures for replacing belts, pulleys, impellers, and related components.
Addresses issues where the tumbler does not turn or the dryer fails to start.
Diagnoses problems related to no spark or no flame at the burner.
Solutions for slow drying times and related operational problems.
Lists part numbers and descriptions for cabinet, doors, and related hardware.
Lists components of the burner assembly, gas valve, and ignition system.
Details parts for the motor, pulleys, belts, and tensioning mechanisms.
Routine cleaning of the lint screen and compartment.
Periodic checks and cleaning of motors, burners, belts, and fasteners.
Less frequent servicing including burner cleaning and pulley bearing checks.
To Next Page