DFI CA64-TC - Page 42

42
Hardware Installation
2.6.16 DIMM and PCI Standby Power LEDs
DIMM Standby Power LED (CA64-TC)
This LED will turn red when the systems power is on or when it is
in the Suspend state (Power On Suspend or Suspend to RAM). It
will not light when the system is in the Soft-Off state.
PCI Standby Power LED
This LED will turn red when the system is in the power-on, Soft-Off
or Suspend state.
Important:
Lighted LEDs serve as a reminder that you must power-off the
system then turn off the power supplys switch or unplug the
power cord prior to installing any memory modules or add-in
cards.