74
!
Award BIOS Setup Utility
Important:
Selecting an external bus clock other than 66MHz, 100MHz or
133MHz may result to the processors or systems instability
and are not guaranteed to provide better system performance.
If you selected an option other than the default setting and is unable
to boot up the system, there are 2 methods of going back to its
default setting.
Method 1: Clear the CMOS data by setting jumper JP3 pins 2 and
3 to On. All fields in the BIOS Setup will automatically
be set to their default settings.
Method 2: Press the <Insert> key and power button simulta-
neously, then release the power button first. Keep-on
pressing the <Insert> key until the power-on screen ap-
pears. This will allow the system to boot according to
the FSB of the processor. Now press the <Del> key to
enter the main menu of the BIOS. Select "Frequency/
Voltage Control" and set the "CPU Host/PCI Clock"
field to its default setting or an appropriate clock fre-
quency.
Note:
Use a PS/2 or AT (requires a DIN to mini DIN adapter)
keyboard for method 2.
To Next Page
Loading...
